[4 pc] PIC32MX795F512L-80I/PF 32bit Microchip microcontroller 80MHz 512K FLASH

Description

Original Electronic Components
PIC32MX795F512L-80 I/PF
Lot size: 4
Case: TQFP-100
32bit Microcontroller, 80MHz, 512K code, 128K RAM, 85 I/O
Genuine components from USA; No China parts!
Family PIC32MX7xx
Max Speed MHz 80
Program Memory Size (KB) 512
RAM (KB) 128
DMA Channels 8
SPITM 4
I2CTM Compatible 5
A/D channels 16
Max A/D Sample Rate 1000
Input Capture 5
Output Compare/Std. PWM 5
16-bit Digital Timers 5
Parallel Port PMP16
Comparators 2
Internal Oscillator 8 MHz, 32 kHz
RTCC Yes
I/O Pins 85
Pin Count 100
Features
MCU Core
* 80MHz, 1.56 DMIPS/MHz, 32-bit MIPS M4K� Core
* USB 2.0 On-The-Go Peripheral with integrated PHY
* 10/100 Ethernet MAC with MII/RMII Interfaces
* 2 x CAN2.0b modules with 1024 buffers
* 8 Dedicated DMA Channels for USB OTG, Ethernet, and CAN
* 5 Stage pipeline, Harvard architecture
* MIPS16e mode for up to 40% smaller code size
* Single cycle multiply and hardware divide unit
* 32 x 32-bit Core Registers
* 32 x 32-bit Shadow Registers
* Fast context switch and interrupt response
MCU System Features
* 512K Flash (plus 12K boot Flash)
* 128K RAM (can execute from RAM)
* 8 Channel General Hardware DMA Controller
* Flash prefetch module with 256 Byte cache
* Lock instructions or data in cache for fast access
* Programmable vector interrupt controller
Analog Features
* Fast and Accurate 16 channel 10-bit ADC,
* Max 1 Mega sample per second at +/- 1LSB, conversion available during SLEEP & IDLE
Power Management Modes
* RUN, IDLE, and SLEEP modes
* Multiple switchable clock modes for each power mode, enables optimum power settings
Debug Features
* iFlow Trace: Non-intrusive Hardware Instruction Trace port (5 Wires)
* 8 hardware breakpoints (6 Instruction and 2 Data)
* 2 wire programming and debugging interface
* JTAG interface supporting Programming, Debugging and Boundary scan
Other MCU Features
* Fail-Safe Clock Monitor - allows safe shutdown if clock fails
* 2 Internal oscillators (8MHz & 31KHz)
* Hardware RTCC (Real-Time Clock and Calendar with Alarms)
* Watchdog Timer with separate RC oscillator
* Pin compatible with 16-bit PIC� MCUs
* Serial Communication Modules allow flexible UART/SPI/I2C� configuration
Purchases can only be changed or cancelled before payment.
Delivery dates provided by eBay are not guaranteed. Transit time can be 5-7 business days in USA after 1-2 day processing, however USPS does not guarantee these times, and can exceed them. If you have any time constraints, please contact seller before bidding / buying, to discuss shipping arrangements and delivery dates.
PAYMENT CLOSES ORDER AND COMMITS IT FOR SHIPPING. Your shipping label is created and billed along with insurance the moment you click "PAY". Paypal and insurance charges are non-recoverable. No cancellation possible after payment.
Any returns not resulting from seller wrongdoing will be assessed a restocking fee of 18% and will forfeit shipping costs.
International transit times can reach 8 weeks, 10 weeks for Italy and Brazil. Contact seller for alternate shipping options if this is not acceptable to you.
RETURNS can only be made with parts that have not been soldered. Before using, buyer must test one part as per the test information in the manufacturer's data sheet. This test is easy for any engineer or technician. This product is aimed at the industrial market. It is not a consumer product.